Dacor HDPR36S User Manual

Also see for HDER30S: Installation instructions Installation instructions and owner's manual User manual

Dacor HDPR36S User Manual Manual pdf 36 page image

36EnglishTurn off power, and let all surfaces cool before cleaning the cooktop. Wear rubber gloves, and be mindful ofsharp edges. Clean the cooktop as instructed in this manual.Using Self-Clean ModeAbout Self-Clean Mode• For best results, clean the oven chamber regularly. Self-cleaning, which takes about 2 1/2 hours, heats theoven to very high temperatures to burn off surface deposits in the oven chamber.• Smoke from the oven chamber is normal during the first few self-clean cycles. The oven also normallymakes popping sounds during self-cleaning due to metal expanding/contracting.• Self-clean mode will not function if the meat-temperature probe is connected; the probe icon blinks, re-minding you to remove the probe.• For less smoke and more efficient self-cleaning, wipe up cooking residue with a damp cloth beforehand.• Exterior range surfaces will be very hot during self-cleaning.• Remove all accessories and foreign items from the oven chamber during self-cleaning.Before Self-Cleaning the Oven• 48" range: You can self-clean one oven at a time; when one oven is in self-clean mode, the other is unusable.• The oven light is inactive during self-cleaning.• Self-cleaning will not work if the meat-temperature probe is connected. (If you try to start self-cleaning andthe probe is connected, the control panel probe icon blinks to alert you to remove the probe.)1. Remove racks, convection filter, cookware, temp probe, and any other foreign items from the oven.2. Wipe the surfaces around the door gasket with a vinegar-water solution, then wipe the surfaces dry. (Cleanheavily soiled areas with a plastic scouring pad.)3. Gently clean the door gasket (see Pg. 39).Maintaining the RangeSelf-Cleaning the Oven1. Ventilate the kitchen well to help remove odors during self-clean cycle.2. Shut the oven door, and tap SELF CLEAN.3. Tap START/CONTINUE.– The cleaning icon ( ) appears on the display.– The lock icon ( ) appears, indicating that the oven door cannot be opened. The oven door locks auto-matically to prevent personal injury from the high temperature generated during self-cleaning. If thedoor is ajar, an error message appears on the display. To clear the error, touch CANCEL/SECURE, wait 1minute, and close the door. When the error clears, restart the process at Step 2.– ON appears on the display, indicating that the oven's heating elements are on.• To stop self-cleaning: Tap CANCEL/SECURE. The oven door remains locked until the oven chamber hascooled sufficiently. (The lock symbol disappears from the display). The oven may still be hot, so be cautious.