Dacor HDPR36S User Manual

Also see for HDER30S: Installation instructions Installation instructions and owner's manual User manual

Dacor HDPR36S User Manual Manual pdf 18 page image

18EnglishOperating the Cooktop1. Place the burner ring so its base fits within the ridgearound the burner head, and rotate the ring until itdrops into place.2. Place the burner cap so the ridge on the bottom of thecap fits over the perimeter of the ring.Assembling the BurnersAssembling a Standard Burner• After assembly, always test the burners for proper func-tion. Improperly assembled parts cause faulty ignition anduneven flames.• If the flame is excessively yellow, shut off the burner, andlet it cool. Adjust the caps, and reignite the burner. A goodflame is blue and consistent around the burner.Assembling a SimmerSearTM Burner1. Place the burner head so its locating tab is in thebase’s keyed hole.2. Place the burner ring so the its tabs fit into the slots inthe head.3. Place the burner cap so the ridge on the bottom of thecap fits over the perimeter of the ring.1. With two hands, grasp a grate with the short sidesoriented at the front and rear of the cooktop.2. Gently set the grate on the cooktop so the grate's feetrest in their corresponding dimples in the spill tray.3. Repeat Step 2 for the remaining grate(s).Placing the Cooktop GratesThe grates are identical, so you can place them in the left, center, or right position but always with the shortside toward the front/rear of the cooktop.For ease of placement, each grate has rubber-tipped feet that fit in "dimples" formed into the cooktop spill tray.