Dacor EF42DBSS Use And Care Manual

Also see for EF42DBSS: Use and care manual Dimensions Planning guide Installation instructions Use and care manual

Contents

Dacor EF42DBSS Use And Care Manual Manual pdf 12 page image

10Remove and Replace the Ingredient Care Center Cover:Remove food from ingredient care center cover. Pull drawer1.out about 4” (10.16 cm). Reach under the glass shelf with bothhands and lift gently upward until back of shelf is free. Tilt shelfat an angle and remove shelf from refrigerator being carefulnot to bump the glass.Replace the cover by holding the glass shelf firmly with both2.hands, tilt the shelf at an angle and position it above thesupport rails. Place shelf gently on support rails on side wall.Crispers and CoversTo remove and replace the crispers:Slide the crisper drawer straight out to the stop. Lift the front1.of the drawer with one hand while supporting the bottom of thedrawer with your other hand and slide the drawer out the restof the way.To replace the crisper drawer, place the drawer onto slides2.and push the drawer back until securely in position.Carefully test the crisper drawer to make sure it has been3.replaced properly.To clean the crisper covers:To clean the top crisper cover, remove the ingredient care centerlocated above it.To clean the bottom crisper cover, first remove the top crisperdrawer.Refrigerator OperationRefrigerator StorageImportant information to know about glass shelves andcovers:Do not clean glass shelves or covers with warm water whenthey are cold. Shelves and covers may break if exposed tosudden temperature changes or impact, such as bumping.Tempered glass is designed to shatter into many small,pebble-size pieces. This is normal. Glass shelves and coversare heavy. Use both hands when removing them to avoiddropping.The shelves and compartments in your refrigerator are adjustableand/or removable to meet your individual storage needs and tomake them easier to clean.Storing similar food items together in your refrigerator andadjusting the shelves compartments to fit different heights ofitems will make finding the exact item you want easier. It will alsoreduce the amount of time the refrigerator door is open, and helpsave energy.Shelves and Shelf FramesTo remove and replace a shelf/frame:Remove the shelf/frame by tilting it up at the front and lifting it1.out of the shelf supports. Pull the shelf straight out.Replace the shelf/frame by guiding the rear shelf hooks into2.the shelf supports. Tilt the front of the shelf up until the rearshelf hooks drop into the shelf supports.Lower the front of the shelf and check to make sure that the3.shelf is securely in position.Ingredient Care CenterThe control for the ingredient care center (for compartmentlocation, see illustration at right) adjusts the storage temperatureof the ingredient care center pan. Cold air flows into the panthrough the air duct between the freezer and the refrigerator.Setting the controls allows more or less cold air through the airduct.To Adjust the IngredientCare Center:Choose a setting based on the1.item to be stored in the pan.Push the button that2.corresponds to that setting.The indicator light for that3.setting will illuminate to verifythat the pan is ready to beloaded.Ingredient Care CenterVarious CheesesJams and JelliesFresh ProduceFresh HerbsBerry FruitsMeatsBeveragesColdColderBAA. Ingredient care centerB. Cripsers