6Tools and PartsThis section describes the refrigerator’s supplied hardware,and the tools and accessories needed for installation.Supplied Hardware/Accessories• Water filter• Anti-tip brackets• Kickplate (and attaching screws)• Front leveling legs (packed with kickplate)• Tapping screws (12 qty.)• Installation Instructions• Use and Care GuideRequired ToolsHave these items available to help with the installation:• Safety glasses• Drill and bits• Socket wrench and sockets (6mm, 12mm)• Open-end wrenches (11mm, 12mm)• Screwdrivers (blade and Phillips)• Tubing cutter• Pliers• Tin snips• Level• Bucket• Appliance dolly• StepladderGrounding the Refrigerator• This refrigerator’s power cord has a 3-prong (grounding)plug, which inserts into a standard 3-prong (grounding)wall outlet to minimize the risk of electric shock.• Ensure a qualified electrician verifies that the wall outletand circuit are properly grounded.• It is the homeowner’s responsibility to have the properoutlet installed. (Do not use a GFI outlet.)Water-Pressure RequirementsThe water dispenser and icemaker need a cold-watersupply with 30–120 psi (207–827 kPa) water pressure.If you install a reverse-osmosis system between the watersupply and refrigerator, the water pressure from the supplyto the osmosis system must be 40–60 psi and from there tothe refrigerator, 30–120 psi.A licensed plumber can answer questions about waterpressure.CAUTIONFOR YOUR SAFETY, THIS APPLIANCE MUST BE PROP-ERLY GROUNDED.INSTALLATION REQUIREMENTSWARNINGFAILURE TO FOLLOW THESE INSTRUCTIONS MAYRESULT IN ELECTRICAL SHOCK/FIRE/DEATH:• Never cut/remove the power cord ground (third) prong.• Do not use an adapter plug to connect the refrigerator to a2-prong outlet.• Do not use an extension plug with this appliance.