Dacor DYF42SBIWS Installation Instructions Manual

Also see for Discovery DYF42SBIWS: Use and care manual User manual

Contents

Dacor DYF42SBIWS Installation Instructions Manual Manual pdf 13 page image

11INSTALLATION INSTRUCTIONSConnecting the Water-Supply LineThis consists of two options in which either: 1) code-approved flexible tubing, or 2) copper tubing, is attached tothe main water-supply shut-off valve.Style 1: Flex Tube to Shut-Off ValveFirst, review the directions. Ensure you have a minimum7-ft. code-approved, flexible supply line.1. (With the refrigerator unplugged) Connect the flextubing to the water shut-off valve by threading theprovided nut onto the valve.2. (With the open end of the tubing in a bucket) Turnon the shut-off valve, check the fittings for leaks, andtighten any loose connections.IMPORTANT• If you turn the refrigerator on before connecting the water line,be sure to turn the ice maker off.• With this installation style, a valve placed behind the refrigera-tor would not allow the refrigerator front to be flush with thecabinets on either side. For a “flush” installation, the shut-offvalve needs to be inside one of the base cabinets to the left/right of the refrigerator.NOTEIf the water-line connection from the home supply line doesnot look like the connection in the graphic below, go instead toStyle 2: Copper Line to Shut-Off Valve.Callout DescriptionA Bulb (engages water-valve outlet)B Nut (slides forward to screw/attach to water-valve outlet)C Flexible water line (carries water to refrigerator)Removing the PackagingThe refrigerator comes bolted to a wooden pallet andboxed in heavy cardboard.Remove the packaging outdoors or in a space with a verytall ceiling.1. Carefully cut the banding at the top/bottom of the carton,and lift the carton off the refrigerator.2. Slide out the two rear-corner posts.3. Remove the kickplate (taped to the top of therefrigerator), and set it aside.4. At the base of the refrigerator on both sides, remove allsix bolts that secure the refrigerator to the pallet.5. From the freezer side, tilt the refrigerator, and removethe bracket.6. Slide the appliance dolly under the freezer side, andcarefully lower the refrigerator.7. Place the corner posts on the refrigerator’s forwardcorners (to protect those corners from tension fromsecurity straps), and secure the refrigerator to the dolly.8. With the appliance dolly, lift the refrigerator off the pallet.CAUTION• The refrigerator is secured to the pallet with six 1/2” bolts. Donot lay the refrigerator down to remove the pallet.• Do not cut, scissor, saw, or otherwise remove the carton withsharp tools.CAUTIONAt least two people are needed to unbox the refrigerator safely.CAUTION• Do not roll/drag the refrigerator while it is on the pallet.• Ensure the water line is clear of the appliance dolly.NOTEYou may need to cut the corner posts to a usable length.NOTEThe refrigerator’s front leveling legs are packed with thekickplate. You will install the legs in a later procedure.