D-Link DIR-615 User Manual

Also see for DIR-615 - Wireless N Router: Training manual Quick installation guide User manual User manual Quick installation guide

43D-Link DIR-615 User ManualSection 4 - ConfigurationPPPoE Dual Stack (cont)All SettingsConnection Type: Select your connection type from drop-down menu:For Dynamic IPv4 refer to page 21.For Static IPv4 refer to page 24For Dynamic IPv6 refer to page 27For Static IPv6 refer to page 30For PPPoE refer to page 33For PPPoE IPv6 refer to page 37For PPPoE Dual Stack refer to page 42For PPTP refer to page 47For L2TP refer to page 51Note: this option can only be edited in the WAN/Creating mode.EnableConnection:Toggle this switch to enable the connection. This is enabled by default.Disabling this feature may disable your Internet connection.PPPWithoutauthorization:Enable this setting to connect without a username and password.This configuration is uncommon and is disabled by default.Username: If Without authorization is disabled, specify the PPP usernameprovided by your ISP.Password: If Without authorization is disabled, specify the PPP passwordprovided by your ISP.