D-Link DIR-615 User Manual

Also see for DIR-615 - Wireless N Router: Training manual Quick installation guide User manual User manual Quick installation guide

28D-Link DIR-615 User ManualSection 4 - ConfigurationDynamic IPv6 (cont)All SettingsConnection Type: Select your connection type from drop-down menu:For Dynamic IPv4 refer to page 21.For Static IPv4 refer to page 24For Dynamic IPv6 refer to page 27For Static IPv6 refer to page 30For PPPoE refer to page 33For PPPoE IPv6 refer to page 37For PPPoE Dual Stack refer to page 42For PPTP refer to page 47For L2TP refer to page 51Note: this option can only be edited in the WAN/Creating mode.EnableConnection:Toggle this switch to enable the connection. This is enabled by default.Disabling this feature may disable your Internet connection.IPv6Get IPv6: Choose Automatically, IPv6 by DHCPv6, by SLAAC, or DHCPv6 PDaccording to the type of IPv6 is used by your ISP. The default settingis Automatically.Gateway bySLAAC:Toggle this switch to obtain gateway information through SLAAC.Gateway IPv6address:If Gateway by SLAAC is disabled, specify the Gateway IPv6 addresshere.Obtain DNSserver addressesautomatically:Toggle this switch to obtain DNS information automatically.