D-Link DCM-200 Quick Install Manual

Also see for DCM-200: Brochure Reference guide Brochure Brochure Manual

Contents

Before you start Modem MAonnecting The Cable ModemLocal Cable ServicePlease contact your Cable Internet provider to find out theprocedure to register the modem with their network.The Cable Internet provider will need the following modem information: Modem Make and Model i.e. D-Link DCM-200 Modem Serial Number i.e. HQT10C000180 (normally found on the label atthe bottom of the unit.C Address i.e. 0050BA2F0804 (on the back of the modem)Connect the external power adapter into*NOTE: Use only the AC power00Cthe connector labeled “POWER” and theother end to the electrical outlet.adapter supplied with the DCM-2Cable Modem.