D-Link DCM-200 Quick Install Manual

Also see for DCM-200: Brochure Reference guide Brochure Brochure Manual

Contents

Before you start1Local Cable ServiceIf you do not have an existing cable Internet connection, contact your localcable operator to subscribe to a broadband connection.For the modem to be recognized on the network of the cable Internet provider,the following modem information will be needed: Modem Make and Model i.e. D-Link DCM-200 Modem Serial Number i.e. HQT10C000180 (normally found on the label atthe bottom of the unit. Modem MAC Address i.e. 0050BA2F0804 (on the back of the modem)Connecting The Cable ModemConnect the external power adapter intothe connector labeled “POWER” andthe other end to the electrical outlet.*NOTE: Use only the AC poweradapter supplied with the DCM-200Cable Modem.