Craftsman PRO Series Operator's Manual

Also see for PRO series: Operator's manual Operator's manual Operator's manual Operator's manual Operator's manual

Ball bearing slidesOPERATOR’S MANUAL• The maximum weight for each drawer should be no more than200 lbs., 300 lbs. for double slides.• The maximum product weight for each model combination,including contents, should be no more than 2,500 lbs. staticload.F2082DANGER is used to indicate a hazardous situation which,if not avoided, will result in serious injury or death.WARNING indicates a hazardous situation which,if not avoided, could result in serious injury or death.CAUTION is used to indicate a hazardous situation which, if notavoided, may result in minor injury, moderate injury, or propertydamage.CAUTION: Read and follow all Safety Rules and OperatingInstructions before assembly and first use of this product.LOCATING MODEL # INFORMATIONModel numbers and other information required for service parts islocated on a label on the interior right side of the top most drawer.• For casters, use high quality bearing grease, (yearly).• Lubricate the slides with grease or equivalent,(twice yearly.)• Lubricate lock with graphite, (yearly).• Periodically the drawer fronts, drawer trim, and other surfacesshould be cleaned with a mild detergent and water.• Auto wax will preserve the unit’s luster finish. Apply the waxas to a car. The wax will also help protect the unit againstscratches.• Grease and oil can be removed with most standardcleaning fluids. For safety, use a nonflammable cleaning fluid.• It is recommended that drawer liners are used to protect thefinish inside the drawers and to make the drawers easier toclean. The drawer liners may be cleaned with soap and water.CHESTS & CABINETS: CALL 1-800-366-7278 FOR SERVICEPARTS. Refer to Service Parts Drawing for full listing of ServiceParts.SMART LOCK: FOR MORE INFORMATION, QUESTIONS ORSUPPORT: Search ‘Smart Lock’ on Craftsman.com or call 1-888-331-4569* Product you purchased may vary from picture shownDistributed by Sears Brands Management Corporation, Hoffman Estates, IL 60179DANGER• DO NOT stand on this product. You may fall or cause productto tip.• DO NOT open more than one drawer. The product may be-come unstable and tip.• DO NOT step in the drawers. You may fall or cause product totip.• DO NOT mount this product on a truck bed or any other mov-ing object.• DO NOT move the product prior to closing and locking all thedrawers and chest lid. The drawers could come open andmake the product unstable and tip.• DO NOT place any objects on top of a closed lid.WARNING• WEAR SAFETY GLASSES when removing or repositioningthe slides.• DO NOT pull the unit, push it when moving. Pushing the unit willprevent serious ankle and foot injuries.• USE THE BRAKES when not moving this product. This willprevent the product from rolling.• DO NOT alter this product in any manner. For example, do notweld external lockbars or attach electrical equipment.• Keep the product on level surfaces. The product may becomeunstable and tip if stored or moved on an uneven surface.• BE CAREFUL when closing drawers, the cover or doors.Remove hands before the cover closes completely.CAUTION• This product is not designed to be directly lifted with a fork lift,or to be towed with any mechanical devices.• Do not exceed the maximum weight capacity for each draweror shelf.• This product should be empty when transporting by vehicle.Properly secure when transporting.• DO NOT exceed maximum product weight, including contents.See Capacities for more information.• As with all metal products, this product can contain burrs andsharp edges. Wear protective gloves during assembly.• Use adequate manpower when assembling and moving thisunit. Failure to do so may cause personal injury or productdamage.THIRD ANGLE PROJECTIONREV. ECO# DATE BY DETAILS / DESCRIPTION Waterloo Industries, Inc. SEDALIA, MISSOURIPART NO.SHEETREVISIONDRAWING NO.DRAWING IS DERIVED FROM SOLIDWORKS CAD MODEL AND IS PRODUCED IN ACCORDANCE WITH ASME Y14.100AND RELATED DOCUMENTATION PRACTICESTHIS DRAWING AND THE INFORMATION IT CONTAINS IS THE PROPRIETARY PROPERTY OF WATERLOOINDUSTRIES, INC. AND MAY NOT BE REPRODUCED WITHOUT WRITTEN PERMISSION FROM WATERLOOINDUSTRIES, INC. PRODUCT ENGINEERING.SCALE SIZEUNLESS OTHERWISE SPECIFIEDDIMENSIONS ARE IN INCHESTOLERANCES:ANGLE 12 PLACE .03 3 PLACE .015OTHER TOLERANCES PER DWG 16856INTERPRET DIMENSIONS ANDTOLERANCES PER ASME Y14.5MTITLEDRAWN BY DATE:MATERIALAssem1 -who 9/15/2016 1:12SHEET 1 of 1 BUSEDINDWGupdateme-with SMART LOCK SAFETYSERVICE PARTSCAPACITIESMAINTENANCE