Craftsman 247.77013.0 Operator's Manual

Also see for 247.77013.0: Operator's manual Operator's manual Operator's manual Parts list Parts list

Contents

10ASSEMBLYFigure 6aTTaCHing THe HOSe aSSeMBLY1. a. Slide hose adapter of hose assembly into the base adapterlocated on the left front of the Yard Vacuum. See Figure 5.b. Pull spring loaded pin out on the base and align pin with the firsthole (closest to the end of the tube) in the hose adapter.c. Release the pin to lock the hose in place.2. a. Snap the hose handle first into the upper hose handle bracketand then into the lower hose handle bracket.b. Lay hose tubing on hanger bracket next to chipper chute. SeeFigure 6.aTTaCHing THe Bag1. Grasp bag handle with one hand and slide locking rod on mountingbracket with other hand toward engine. Use the end of mountingbracket as leverage when sliding the locking rod.a. Slip bag over the rim of the discharge opening and releaselocking rod to secure bag in place. See Figure 7.b. Snap bag clip to the top of the lower handle.c. Place the lower straps on the bag over the top of lower handle,hooking them on the studs. See Figure 7.NOTE: The bag/chute switch button attached to the mounting bracketmust be fully depressed by the tip of front tab on bag handle whensecuring the bag or engine will not start.Figure 7Figure 5ABCBAABAlign pinwith thishole.