Menu
Craftsman 171.926501 Owner's Manual
                                                                                                |
MOUNTING THE ROUTER TOTHE ROUTER TABLE--THREEHOLE MOUNTING PATTERN(Figs. 7 and 8)I _WARNINGI Alwaysmakesurethat the router is NOT plugged into anelectrical outlet or the switch when therouter is being installed on the routertable. If it is, UNPLUG the power cordfrom the outlet or the switch, andUNPLUG the switch from the outlet.With the fence moved toward the back ofthe table, mount the router to the table:1. If held in place by screw fasteners,remove the plastic sub-base from therouter (see your router manual forinstructions).2. While holding the router upside down,position the router against the bottomof the router table, centering the colletin the hole. If the router has a vacuumport, it should face the back of thetable. Align the three threaded holesin the router base with the threecountersunk holes in the tabletop(Figs. 7 and 8). It may help to supportthe router with a block of wood.3. Mount the router to the tabletop withthree #10-32 x 5/8" countersunkPhillips head machine screws (20).Tighten the screws securely.! Figure 7 _ _li._bi_Craftsman Router_V"model 17508router shownI Figure 8I/:p a oum15 |
Related manuals for Craftsman 171.0970874
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved