Craftsman 161.210400 Owner's Manual

_ge JDESCRIPTIONFRONT PANEL AND CONTROLSFIGURE II •e.4_eMETER. Provides following scales-Low Ohms X 1, 0 to 1,000 Ohms (10Ohms center scale), HI Ohms X1,000, (10,000 Ohms center scale)tRPM Hi 0-6000, Lo 0-1200 RPM,Volts 0-i6 Lo, 0-32 Hi. Dwell 8cyl. _)-45 a , 4 cy!. 0-90 °, 6 cyl.0-60 , Amps, Parers 0-3.2 Volts1AIte rnator-good/defective zones.ZERO ADJUSTER. Meter painteradjustment, if pointer is not on zero,slowly rotate this plastic slotted screwright or left to set pointer on zeroline. Check before testing.RED AMPS SOCKET. Insert RED plugon Amps lead.WHITE OHMS SOCKET. Insert WHITEplug on Ohms lead.BLUE RPM PICK UP SOCKET. InsertBlue plug on inductive pickup lead.6. BLACK - OTHER TESTS SOCKET. In-sert BLACK plug on test lead.• OTHER TESTS SELECTOR SWITCH.Always place switch In CENTER posi-tion for all tests, indlcoted by functlonswitch (No.B) above. Use left hand posl-tlon for charging Amps and right handpositton for starting Amps. ALWAYSreturn switch to center posltlon whenAmp$ test is completed.. FUNCTION SELECTOR SWITCH. Usedto select meter range for each test.A description of each test function isdescribed on page 4.. RANGE SELECTOR SWITCH. Selectfor HIGH or LOW scale range for VOLTS,RPM, or OHMS depending on the testbeing performed.