Menu
Craftsman 139.53684 Security+ User Instructions
    | |
CRRFTSMRHFEATURESFor use with any Security+ garage door openers having anorange "learn" button.Personalized Password: Up to 10,000 possiblecombinations. Password can be easily changed if desired.Temporary password: Can be added for visitors or servicepersons. This temporary password can be limited to aprogrammable number of hours or a programmable numberof entries.Rolling Code: While your password remains constant untilyou change it, the code between the Keyless Entry and thereceiver changes with each use, randomly accessing over100 billion new codes.Operation: Opener activates when 4-digit password andEnter button is pressed.If wrong numbers are accidentally pressed, correction can bemade immediately. The Enter button will transmit only thelast four digits.The Keypad will blink for 15 seconds after the password istransmitted. During that time the Enter button can be used tostop or reverse the door travel.The Lock feature on openers with premium door controls isdesigned to prevent operation of the door from portabletransmitters. However, the door will open and close from thedoor control push button and the Keyless Entry.Model 139.53684 Security+Keyless EntryUSER INSTRUCTIONSTopreventpossibleSERIOUSINJURYor DEATHfrom a movinggate or garage door:• ALWAYS keepremote controls out of reach of children. NEVERpermitchildren to operate,or playwith remote controltransmitters.• Activate gateor door ONLY when it can be seen clearly,isproperlyadjusted,and there are no obstructions to door travel.• ALWAYS keepgateor garage door in sight until completelyclosed. NEVER permitanyone to cross pathof movinggateor door.NOTICE:To comply with FCCand or Industry Canada(IC) rules, adjustment or modifications ofthis receiverand/or transmitter are prohibited, exceptfor changing the code setting or replacingthe battery. THEREARE NOOTHERUSERSERVICEABLEPARTS.Testedto Comply with FOCStandards FORHOMEOROFFICEUSE.Operation is subjectto thefollowing two conditions: (1) this device may not cause harmful interference,and (2) this devicemust acceptany interference received,including interferencethat may cause undesiredoperation.SETTING THE PERSONAL ENTRY PASSWORDWe recommend that you program your password now, before you install the Keyless Entry. Then you can test the receptionat the mounting location before you proceed further.USING THE PREMIUM CONTROL CONSOLE USING THE "LEARN" BUTTON1. Enter a four digit personal identificationnumber (PIN) of your choice on the keypad.Then press and hold ENTER.2. While holding the ENTER button, press andhold the LIGHT button on the PremiumControl Console.3. Continue holding the ENTER and LIGHTbuttons while you press the push bar on thePremium Control Console (all three buttonsare held).4. Release buttons when the motor unit lightsblink. It has learned the code. If light bulbsare not installed, two clicks will be heard.)1. Press and release the "learn" button on motor _l ][_,unit. The learn indicator light will glowsteadily for 30 seconds.2. Within 30 seconds, enter a four digit personalidentification number (PIN) of your choice onthe keypad. Then press and hold the ENTERbutton.3. Release the button when the motor unit lightsblink. It has learned the code. If light bulbs are ( "(_ /not installed, two clicks will be heard. _ /_ \/Side two contains instructions for installing the KeylessEntry, changing the personal entry password and setting atemporary password. |
Related manuals for Craftsman 139.53684 Security+
This manual is suitable for:
Product
Learn More
Legal
Copyright © 2024 OneStart. All Rights Reserved