Craftsman 125.12007 Operator's Manual

Also see for 125.12007: Operator's manual

9Operation (continued)Blowing FeatureWARNING: Always wear safety goggles complying with ANSI Z87.1 (or inCanada, CSA Z94.3) before using blower.WARNING: Keep bystanders clear from blowing debris.WARNING: Wear a dust mask if blowing creates dust that might be inhaled.!!!This Wet/Dry Vac has blowing capabilities.To use the blower feature follow theinstructions listed.1. Verify that the power cord isdisconnected from the outlet. (Fig. 1)2. Make sure the collection tank is emptybefore using as a blower.3. Remove hose from the vacuum port.4. Insert the larger end of the hose into theblowing port on the back side of thepower head. (Fig. 2)5. Fit the desired attachment to the hose.(Fig. 3)6. Verify that the power switch is in the ‘O’OFF position before plugging the powercord into the outlet. (Fig. 4, Fig. 5)7. Before turning ON the vac, firmly holdthe loose end of the hose. Turn themotor on by pressing the switch to the ‘I’ON position. (Fig. 6)8. Once you have completed blowing,press the power switch to the 'O' (OFF)position and unplug the power cordfrom the outlet. (Fig. 7)62 43 517