Craftsman 113.179100 Owner's Manual

Contents

Operation (continued)Blowing FeatureYour Vac features a blowing port. It canblow sawdust and other debris. Follow thesteps below to use your Vac as a blower.WARNING: Always wear safetyeyewear complying with ANSI Z87.1(or in Canada CSA Z94.3) when usingas a blower.WARNING: To reduce the risk ofinjury to bystanders, keep them clearof blowing debris.,_ CAUTION: Wear a dust mask ifblowing creates dust which might beinhaled.A CAUTION: To reduce the risk ofhearing damage, wear ear protectorswhen using the Vac/Blower forextended time or in a noisy area.1. Locate blowing port of your Vac.2. Insert the locking end of thePos-I-Lock® premium hose into theblowing port of the Vac. The hoseshould snap into place. To remove thehose from the Vac, press the releasebutton in the hose assembly and pullthe hose out of the Vac inlet.3. (Optional) Attach extension wand toopposite end of hose.4. Turn Vac on and you are ready to useyour Vac as a blower.BlowingPortPos-I-Lock®PremiumHose14