Craftsman 107.16575 Owner's Manual

Also see for 107.16574: Owner's manual

r.Mr. uhhKo• If connected to a circuit protected by fuses, use time-delayfuses with this product.• To reduce the risk of electric shock, do not expose to rain.Store indoors.• Inspect the tank yearly for rust, pin holes, or otherimperfections that could cause it to become unsafe. Neverweld or drill holes in the air tank.• Make sure the hose is free of obstructions or snags.Entangled or snarled hoses can cause loss of balance orfooting and may become damaged.• Use the air compressor only for its intended use. Donot alter or modify the unit from the original design orfunction.• Always be aware that misuse and improper handling ofthis tool can cause injury to yourself and others.• Never leave a tool unattended with the air hose attached.• Do not operate this tool if it does not contain a legiblewarning label.• Do not continue to use a tool or hose that leaks air ordoes not function properly.• Always disconnect the air supply and power supply beforemaking adjustments, servicing a tool, or when a tool is not inuse.• Do not attempt to pull or carry the air compressor by thehose.• Your tool may require more air consumption than this aircompressor is capable of providing.• Always follow all safety rules recommended by themanufacturer of your tool, in addition to all safety rulesfor the air compressor. Following these rules will reduce therisk of serious personal injury.• Never direct a jet of compressed air toward people oranimals. Take care not to blow dust and dirt towardsyourself or others. Following this rule will reduce the risk ofserious injury.• Protect your lungs. Wear a face or dust mask if the operationis dusty. Following this rule will reduce the risk of seriouspersonal injury.• Do not use this air compressor to spray chemicals. Yourlungs can be damaged by inhaling toxic fumes. A respiratormay be necessary in dusty environments or when sprayingpaint. Do not carry while painting.• Inspect tool cords and hoses periodically and, ifdamaged, have repaired at a qualified service center.Constantly stay aware of cord location. Following this rulewill reduce the risk of electric shock or fire.• Never use an electrical adaptor with this grounded plug.• Check damaged parts. Before further use of the aircompressor or air tool, a guard or other part that isdamaged should be carefully checked to determinethat it will operate properly and perform its intendedfunction. Check for alignment of moving parts, bindingof moving parts, breakage of parts, mounting, and anyother conditions that may affect its operation. A guard orother part that is damaged should be properly repaired orreplaced by a qualified service center. Following this rulewill reduce the risk of shock, fire or serious injury.• Make sure your extension cord is in good condition.When using an extension cord, be sure to use one heavyenough to carry the current your product will draw. A wiregauge size (A.W.G.) of at least 14 is recommended for anextension cord 50 feet or less in length. A cord exceeding100 feet is not recommended. If in doubt, use the nextheavier gauge. The smaller the gauge number, the heavierthe cord. An undersized cord will cause a drop in line voltageresulting in loss of power and overheating.• Save these instructions. Refer to them frequently and usethem to instruct others who may use this air compressor. Ifyou loan someone this tool, load them these instructions also.