Cisco Catalyst X4232 Installation And Configuration Note

Also see for Catalyst 4000: End user guide Troubleshooting Manual Preparing to install Quick start guide

Corporate Headquarters: Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USACopyright 2001. Cisco Systems, Inc. All rights reserved. 78-10164-03Installation and Configuration Note for theCatalyst 4000 Layer 3 Services ModuleProduct Numbers: WS-X4232-L3(=)This installation and configuration note describes how to install and configure the Catalyst 4000 Layer3 Services module.For a complete description of commands to configure Catalyst 4003 and 4006 switches, refer to theSoftware Configuration Guide and Command Reference publications for your switch. For completeswitch hardware configuration and maintenance procedures, refer to the Catalyst 4003 and 4006 SwitchInstallation Guide. These documents are available on the Documentation CD-ROM, or in print.ContentsThis publication contains these sections:• Software Requirements, page 2• Features, page 2• Configuring IOS Features, page 5• Functional Description, page 6• Front Panel Description, page 7• Specifications, page 9• Standards Compliance Specifications, page 10• Gigabit Interface Converters, page 10• Safety Overview, page 13• Translated Safety Warnings, page 15• Removing and Installing a Layer 3 Services Module, page 20• Accessing the Layer 3 Services Module for the First Time, page 27• Upgrading Images, page 32• Overview of the Catalyst 4003 and 4006 Layer 3 Services Module Interfaces, page 33