Cisco 4000 Preparing To Install

Also see for Catalyst 4000: End user guide Installation and configuration note Troubleshooting Manual Quick start guide

Contents

C H A P T E RPreparing to Install Cisco 4000 Series Routers 2-1Preparing to InstallCisco 4000 Series Routers2This chapter includes information you need before you install your Cisco 4000 seriesrouter. It includes the following sections:• Safety Recommendations• General Site Requirements• Installation Checklist• Site Log• Required Tools and Equipment• Inspecting the SystemSafety RecommendationsThe following guidelines will help to ensure your safety and protect the equipment.• Keep the chassis area clear and dust-free during and after installation.• Turn the power supply off and unplug the power cord before opening the chassis.Warning Before working on a chassis or working near power supplies, unplug the powercord on AC units; disconnect the power at the circuit breaker on DC units. (To see translatedversions of this warning, refer to the appendix “Translated Safety Warnings.”)• Keep tools and chassis components away from walk areas.