Cisco Card Cage and Backplane Cisco 7513-MX Replacement Instructions Manual

Also see for 7513 Series: Configuration guide Datasheet Quick start guide Hardware installation and maintenance manual Manual

Contents

1Cisco Systems, Inc.All rights reserved.170 West Tasman DriveSan Jose, CA 95134-1706USACisco Systems, Inc.Corporate HeadquartersCopyright © 1999Cisco 7513, Cisco 7513-MX, andCisco 7576 Card Cage and BackplaneAssembly Replacement InstructionsProduct Numbers: MAS-7513CDCAGE= (Cisco 7513), MAS-7513MX-CDCAGE=(Cisco 7513-MX), MAS-7576CDCAGE= (Cisco 7576)This publication provides the procedures to replace the card cage and backplane assembly in theCisco 7513, Cisco 7513-MX, and Cisco 7576 routers. The card cage and backplane assembly for theCisco 7513, Cisco 7513-MX, and Cisco 7576 chassis can be replaced in the field. The assembly is asingle field-replaceable unit (FRU) that requires replacement by a Cisco-certified service provideronly.This publication assumes you have already performed troubleshooting on your chassis and systemand determined that this replacement is required.Document ContentsThis publication includes the following sections:• Product Overview, page 2• Installation Safety, ESD Precautions, and Tools Required, page 5• Removing and Replacing Processor Modules, page 9• Removing Power Supplies, page 12• Removing the Old Card Cage and Backplane Assembly, page 14• Exchanging the EEPROM Devices, page 16• Installing the New Card Cage and Backplane Assembly, page 18• Replacing Power Supplies, page 20• Checking the System, page 21• Port and Slot Configuration Worksheet, page 23• Cisco Connection Online, page 25Text Part Number: 78-1895-04Customer Order Number: DOC-781895=