Cisco 6800 Series Hardware Installation

Also see for 6800 Series: Installation guide Provisioning guide Quick start guide User guide User guide

Hardware Installation• Installation Requirements, on page 1• Install the Base Station, on page 6• Mount the Base Station or Repeater on the Ceiling, on page 7• Mount the Base Station or Repeater on a Desk, on page 11• Mount the Base Station or Repeater on the Wall, on page 12• Install the Battery in the Handset, on page 16• Set Up the Charging Cradle, on page 19• Charge the Handset Battery, on page 19Installation RequirementsThe Cisco IP DECT 6800 Series is made up of the following hardware:• 6825 Handset• 6825 Ruggedized Handset• 6823 Handset• 110 Single-Cell Base Station• 210 Multi-Cell Base Station• 110 RepeaterThe 110 Single-Cell Base Station can't be used in the multicell system.NoteBefore you begin to set up the Cisco IP DECT 6800 Series system:• Determine the number of users (handsets) that are required.• Determine the number of phone lines (numbers) that are required. Each user can have up to 2 lines and2 concurrent calls, if the supported total number of concurrent calls on the system aren’t reached.• Given the number of handsets, determine the number of base stations required, based on:Hardware Installation1