Canon varioPRINT 135 Series Operation Manual

Also see for varioPRINT 110: Customer expectation document

[Number of sets]Setting Values Description[Number of sets] [Check first set] When the [Check first set] setting is enabled,the printer stops after the first set of a job hasbeen printed. You can check the quality of theoutput.NOTEThis setting is only available when inthe workflow profile [Check first set]is set to [As in job].[Number of sets] You can indicate how many copies of the jobyou need. You can enter a value from 1 -65,000. The default value is 1.Job NameSetting Values Description[Job name] To identify your job more easily, you can changethe name of the job. When you touch the [Jobname] button a keyboard appears. Then you canchange the name of the job.[Page range]Setting Values Description[Page range] [All] When [All] is selected, all pages of the job willbe printed.[Page range] When [Page range] is selected, use the [From]and [To] fields to indicate the first and last pa-ges you want printed.[Separator sheets]Setting Values Description[Separator sheets] [On] When the [Separator sheets] setting is ena-bled, a separate sheet is inserted automaticallybefore each set of a job to create a clear dis-tinction between two sets. Separator sheetsare always empty. In the Settings Editor, selecta media from the media catalog use as separa-tor sheets. You can also indicate the feed di-rection of the separator sheets (long-edge feedor short-edge feed).[Off] No separator sheet will be inserted beforeeach set.Description of the Print Job Settings that You Can Change on the Control Panel146 Chapter 6 - Carry Out Print Jobs Canon varioPRINT 135 Series