Canon varioPRINT 135 Series Operation Manual

Also see for varioPRINT 110: Customer expectation document

• Measure the distance for all the corners in the direction perpendicular to the feed direction.• Calculate the average value in the feed direction (X) and the average value in the directionperpendicular to the feed direction (Z).3. Enter the values according to the table below.4. Confirm the changed values.5. Print the verification chart again and verify if the media registration is optimal.If the media registration is not optimal, change the value or use another setting depending onhow the registration looks.Values for the Media RegistrationSettings front side What to enter[X offset ({0})] The image is shifted in X direction (feed direc-tion) in mm (inches).A shift > 0 moves the image to the right-handside (trailing edge):• The distance between the leading edge ofthe sheet and the image on the sheet increa-ses.• The distance between the trailing edge ofthe sheet and the image on the sheet de-creases.• The circles on the verification chart move tothe right-hand side (trailing edge).A shift < 0 moves the image to the left-handside (leading edge):• The distance between the leading edge ofthe sheet and the image on the sheet de-creases.• The distance between the trailing edge ofthe sheet and the image on the sheet increa-ses.• The circles on the verification chart move tothe left-hand side (leading edge).[Z offset ({0})] The image is shifted in Z direction (perpendic-ular on the feed direction) in mm (inches).A shift > 0 moves the image to the top of thesheet:• The distance between the top of the sheetand the image on the sheet decreases.• The circles on the verification chart move tothe top of the sheet.A shift < 0 moves the image to the bottom ofthe sheet:• The distance between the top of the sheetand the image on the sheet increases.• The circles on the verification chart move tothe bottom of the sheet.Values for the Media RegistrationChapter 5 - Media Handling 103Canon varioPRINT 135 Series