Canon imageRUNNER ADVANCE-series Service Manual

Also see for imageRUNNER ADVANCE-series: Copy guide

Canon imageRUNNER ADVANCE-series Service Manual Manual pdf 15 page image

22 2-32-3Preparation > Network Settings > Confirming URL Setting of Distribution ServerPreparation > Network Settings > Confirming URL Setting of Distribution ServerNetwork SettingsConnecting to External NetworkThe method of connecting to external network is similar to a normal network connectionmethod. Refer to user manual of the device for details.NOTE:See User Manual for how to connect the device to the external network.Before using UGW link or User mode, see the sections below to prepare as required.“Enabling UGW Link”“Enabling [Update Firmware] Button of User Mode”“Enabling [Install Application/Options] Button of User Mode”••NOTE:“External Network” here means the network connecting the device to CDS via Internet.Confirming URL Setting of Distribution ServerThis section describes how to confirm the URL setting of the distribution server.1. Start [Service Mode] at Level 1.1). Press [Setting/Registration (User Mode)] button on the control panel.2). Press [2] and [8] buttons at a time on the control panel.3). Press [Setting/Registration (User Mode)] button on the control panel.4). [Service Mode] screen is shown.2. Press [Updater] button.F-2-1F-2-1