MEAP Settings7-647System Manager SettingsMEAP SettingsYou can print information about installed MEAP applications. You can also specifyHTTP (Hyper Text Transfer Protocol) settings for MEAP if required by the MEAPapplications you are using.Use HTTP ServerSet Use HTTP to 'On' to access this machine from a Web browser, and utilize theinstalled MEAP applications.IMPORTANTSetting Use HTTP to 'On' enables you to:- Access the [User Management/Settings] page of SDL (Simple Device Login).- Manage user information for the Local Device Authentication system of SSO (SingleSign-On).- Change the SSO user authentication system to Domain Authentication, DomainAuthentication + Local Device Authentication, or Local Device Authentication.- Use the Remote UI.NOTE• Set Use HTTP to 'On' if HTTP is required for MEAP functions and MEAP applications. Touse HTTP for functions other than MEAP (e.g., the Remote UI), set Use HTTP inNetwork Settings (from the Additional Functions screen) to 'On'. (See Chapter 3, "Usinga TCP/IP Network," in the Network Guide.)• If you set Use HTTP in System Settings (from the Additional Functions screen) to 'On',the port number for MEAP functions and MEAP applications is automatically set to'8000'.• The default setting is 'On'.1 Press (Additional Functions) ➞ [System Settings].If necessary, see the screen shot in step 1 of "Specifying the System ManagerSettings," on p. 7-3.If the System Manager ID and System Password have been set, enter the SystemManager ID and System Password using - (numeric keys) ➞ press (ID).
