Specifying Common Settings4-724Customizing Settings - Common SettingsStandard Local Print SettingsYou can set the standard print settings for the machine. The Standard Local PrintSettings are used in the following cases:*1 Indicates the default setting.• If you print documents stored in inboxes without changing the print settings• If you merge and print multiple documents stored in an inbox• If you reset the settings before printing a document that has been sent from acomputer and stored in an inboxThe Standard Local Print Settings are:• Paper Select (Paper source): Auto *1• Copies: 1*1• Finisher:- The optional Copy Tray-L1 is attached:Do Not Collate, Collate *1 , Rotate Collate, Group, Rotate Group- The optional Finisher-T1 or Saddle Finisher-T2 is attached:Do Not Collate, Collate, Offset Collate *1, Group, Offset Group, Staple (Corner:Top Left, Bottom Left, Top Right, Bottom Right), (Double: Left, Right)- The optional Finisher-T1 or Saddle Finisher-T2, and Puncher Unit-M1 areattached:Do Not Collate, Collate, Offset Collate *1, Group, Offset Group, Staple (Corner:Top Left, Bottom Left, Top Right, Bottom Right), (Double: Left, Right), Hole Punch- Face Up/Face Down (for all finishers):Auto *1: If you scan and print a single page original, or print onnonstandard sized paper, or other available paper that isloaded in the stack bypass, the printed sheets are outputface up. Otherwise, the printed sheets are output face down.Face Down (Normal):Printed sheets are always output face down.Face Up (Reverse): Printed sheets are always output face up.• Two-sided Print: On, Off*1• Erase Document After Printing: On, Off *1• Merge Documents: On, Off*1
