Chapter 3 Handling 37❏ Business CardSizeWidth: 1.97" (50 mm) and aboveLength: 3.35" (85 mm) and aboveThickness101.33 lb Cover (380 g/m2 ) and belowIMPORTANT• We recommend placing business cards horizontally. Verticallyplaced business cards may not feed properly depending ontheir size.• If the stack of business cards that you placed is not fedproperly, reduce the number business cards.• Business cards may sometimes be stacked in the wrong orderwhen they are ejected, depending on the size and thicknessof the business cards, and the orientation that they are loaded.❏ Card (plastic)Size2.12" x 3.37" (54 mm x 86 mm) (ISO standard)Card thickness0.055" (1.4 mm) or smallerOrientationHorizontal feeding onlyEmbossed cardsEmbossed cards can be scanned.Loading capacity10 cards (non-embossed), 1 card (embossed)CAUTION• When scanning cards, place them to be fed horizontally. If youplace cards to be fed vertically, they may not be ejectedproperly, and cards that get jammed may be damaged whenyou remove them.• Embossed cards may not be able to be scanned correctly,depending on the type of embossment.• When scanning cards, set [Double feed detection byUltrasonic] to [OFF] in the Detailed Settings screen. (Refer top. 89 of the ScanFront 400 INSTRUCTIONS.)❏ PassportSize3.46" × 4.92" (88 mm × 125 mm) (ISO standard)Insert the passport into an optional carrier sheet(passport type) in an opened state.Thickness0.236" (6 mm) or less (including carrier sheet)