Canon imageFORMULA DR-2010M User Manual

Also see for 3950B002: Brochure

Contents

Canon imageFORMULA DR-2010M User Manual Manual pdf 13 page image

Back Previous Page Next PageContents13IMPORTANT• If you do not know the requirements for your computer system, contact thestore where you purchased the computer or the manufacturer of thecomputer for more information.• If you use the scanner with Windows, use the latest USB 2.0 driver madeavailable by Microsoft. For details, consult your local authorized Canondealer.• Use the USB interface provided as standard with your computer. However,normal operation is not guaranteed with all USB interfaces, even if presentas standard equipment on the computer. For details, consult your localauthorized Canon dealer.• Scanning speeds are lower if your computer's standard USB interface is USBFull-Speed (equal to USB 1.1.)• The USB cable you are using should be the one originally included with thescanner.• If the CPU, memory, interface card, and other specifications do not satisfythe installation requirements, the scanning speed may be greatly reducedand transmission may take a long time.• Even if the computer satisfies the recommended specifications, the scanningspeed may vary, depending on the specified scan settings.• The scanner drivers provided with the scanner do not necessarily operate onall ISIS (only for Windows) or TWAIN-compatible applications. For details,contact your application software retailer.2. Installing the SoftwareThis section describes how to install the required software.The following software is included on the Setup disc provided with the scanner.• CaptureOnTouchThis is a dedicated scanning utility for this product.• Scanner DriverThe scanner driver for using the scanner with ISIS-compatible (Windows only)and TWAIN-compatible applications.• CapturePerfect 3.0 (Windows only)An ISIS compatible application developed for use with Canon documentscanners.NOTEThe Setup disc for Windows is configured as follows. Install the software usingeither [Typical Installation] or [Custom Installation].Setup DiscMenu Screen Typical InstallationRead Manuals Custom Installation