Canon imageCLASS D880 Fax Manual

Also see for imageCLASS D860: Printer guide Setup instructions Basic guide

Contents

Canon imageCLASS D880 Fax Manual Manual pdf 55 page image

5-9Since the machine is a multitasking device, it can receive faxes and voice calls while you are performing othertasks.If you receive a fax while you are performing other tasks, the machine stores the incoming fax in memory. Then,as soon as you finish your task, your fax will be received.• If you are copying or printing, printing of the received fax is suspended and then resumed after copyingor printing is finished.If the machine encounters a problem when it is receiving a fax, the machine automatically stores the unprintedpages of the fax in memory, and the LCD displays RECEIVED IN MEMORY. When the problem is cleared, themachine automatically prints the stored fax in memory. For an explanation of the messages that appear on theLCD display, and details on the action to take, → p. 8-1.• The machine memory can store up to approximately 255 pages.*• Once the pages are printed, they are deleted from memory.• If the memory becomes full, you will not be able to receive the remaining pages. Contact the otherparty and ask them to resend the remainder of the fax.• The maximum number of pages that the machine’s memory can store differs depending on the otherparty’s machine.* Based on the condition that the other party sends the fax to imageCLASS D880, in the ITU-T No.1 Chart,Standard mode.Follow this procedure to stop receiving a fax before reception is completed:Canceling ReceivingNOTEReceiving Faxes in Memory When a Problem OccursNOTEReceiving While Performing Other TasksReceiving Faxes51 Press Stop/Reset.• The machine asks you to confirm if you want tocancel.2 Press 4 (–) to cancel receiving.• If you change your mind and want to continuereceiving, press e (+).C A N C E L D U R I N G T X / R X ?< Y E S N O >