Canon imageCLASS D860 Basic Manual

Also see for imageCLASS D860: Printer guide Setup instructions Fax guide

Contents

Canon imageCLASS D860 Basic Manual Manual pdf 14 page image

1-8This machine provides an energy saver function. When no operations are performed for about five minutes, themachine automatically enters the energy saver mode.• The time until the machine enters the energy saver mode can be specified in the range from 3 to 30minutes. You can also turn off the energy saver function. (→ p. 7-4)• The energy saver function does not activate when the machine is in the following status:– When printing out copies or faxes* or other pages– When sending or receiving faxes*– While a copy job is saved in memory or when the reserve copy or other functions are operating, orwhen the In Use/Memory indicator lights up*– When paper jams occur– When the platen unit is not returned to the original position– When an error code appears and the Alarm indicator flashes– When PRESS SET KEY is displayed* Only for the imageCLASS D880 modelSetting the Energy Saver Mode ManuallyRestoring from the Energy Saver ModeNOTEEnergy Saver Mode1 Press Energy Saver.• The LCD display is turned off and the Energy Saver key lights up.• Right after the machine is restored from the energy saver mode, or right after copying finishes, waitabout five seconds before pressing Energy Saver.NOTE1 Press Energy Saver.• The Energy Saver key goes off and the machine enters the standby mode.• The machine can be restored from the energy saver mode immediately. However, it may vary accordingto room temperature and circumstances.NOTE