Canon imageCLASS 2300 Printer Manual

Also see for 2300N - ImageCLASS B/W Laser: Copying guide Specifications Basic guide Setup Reference guide

Contents

Canon imageCLASS 2300 Printer Manual Manual pdf 85 page image

Responding to Error Messages4-8Troubleshooting4Responding to Error MessagesIf printing is disabled during a print job for some reason, the Alarm indicator willlight up and an error message(s) will appear on the display. In addition, for anyphenomenon that does not affect printing function of the printer but requires somemeasure to be taken, a warning message will appear on the display. When any ofthese messages appear on the display, follow one of the remedies listed to respondto the message.NOTE• When two or more problems that are indicated by warning messages occursimultaneously, the corresponding messages will appear alternately.• When two or more error messages appear on the display simultaneously, warningmessages will not appear there.• For messages attached with , the printer will be able to continue printing by"skipping errors" when you press [OK]. It should be remembered, however, that somepieces of print data may be omitted or may not be printed correctly. If you want to stop theprocedure, perform a software reset and remove the cause. Then press [OK] to startprinting again.E001 ERROR CALL FOR SERVICECause A fuser overheating error.Remedy Turn the printer OFF, wait 15 minutes and then turn the printer back ON. If thiserror persists, turn the printer OFF, unplug power cord from the AC outlet andcontact your service representative.E100-ERROR CALL FOR SERVICECause A scanner motor or laser unit error.Remedy If this error persists, contact your service representative.E805-ERROR CALL FOR SERVICECause A fan failure error.Remedy Turn the printer OFF, wait 15 minutes and then turn the printer back ON. If thiserror persists, turn the printer OFF, unplug power cord from the AC outlet andcontact your service representative.