PCL Menu3-14Summary of the Printer Menus3PT. SIZE4.00 to 999.75; 12.00*The Point Size setting is the measured vertical height of a typeface. There are 72points per inch, so a 36 point font is half an inch high, measured from the top ofthe uppercase letters to the tail of the letter y.If the font selected in the FONTNUM setting is a bitmap or fixed spacing font, thisitem will not appear for selection.12.00The printer font source is set for 12 point.4.00 to 999.75To increase the number in increments of 0.25, press [F3] (VALUE). To quicklyscroll through the numbers in increments of 1.00, hold down [F3] (VALUE).To decrease the number in decrements of 0.25, press [BACK] ➞ [F3] (VALUE). Toquickly scroll through the numbers in decrements of 1.00, press [BACK] ➞ holddown [F3] (VALUE).PITCH0.44 to 99.99 cpi; 10.00*Pitch is measured as the number of equally spaced characters per inch.PITCH appears only if the font source you selected with FNTSRC (font source)and FONTNUM (font number) above is a scalable font in a fixed pitch typeface.Use this item to set the pitch of the font.10.00The selected pitch is 10 characters per inch.0.44 to 99.99To increase the number in increments of 0.01, press [F3] (VALUE). To quicklyscroll through the numbers in increments of 1.00, hold down [F3] (VALUE).To decrease the number in decrements of 0.01, press [BACK] ➞ [F3] (VALUE). Toquickly scroll through the numbers in decrements of 1.00, press [BACK] ➞ holddown [F3] (VALUE).
