F Cut SpeedSelect the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automat-ic cutting is used.Setting Item DetailsPrinter Default The setting of the control panel of the printer is applied.High Speed When the Standard setting does not result in cutting the surface cleanly, select this.Standard Select this when you do not have any problems in automatic cutting.Low Speed This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you selectit when using adhesive paper.H Calibration ValueYou can specify whether to apply the results of calibration performed on the printer to image processing.Setting Item DetailsPrinter Default The setting of the control panel of the printer is applied.Enabled Print using the calibration results.Disabled Print without using the calibration results. Select this to avoid the changing of the color of im-ages during printing by color calibration.G MirrorSpecify whether to print a mirror image, as needed. Select this option to print a version of the document or imagewith the left and right sides inverted.View Settings Dialog Box for the Printing ApplicationView Settings Dialog Box for the Printing ApplicationIn the View Settings dialog box, you can check details of the selected printing application.Note• To display the View Settings dialog box, on the Main sheet, click View Settings by Print Target. (See "MainSheet .") ➔ P.159• A Print TargetShows all Print Target options (settings items for the printing application).• B NameIdentifies the item selected in Print Target by its name and an icon.• C DetailsHere, you can confirm detailed settings values for each listed item for the selected Print Target.iPF8400S View Settings Dialog Box for the Printing ApplicationUser's GuideWindows Software Printer Driver163
