Canon i470D Printing Manual

Also see for i470D Series: Printing guide Setup instructions Quick start guide Quick start guide Service manual

Contents

Canon i470D Printing Manual Manual pdf 42 page image

Troubleshooting42An Error Message is Displayed While Using the PhotoViewerIf one of the following messages appears while using the Photo Viewer, printing may be disabledor the Photo Viewer may be terminated forcibly.Error Massage Try ThisExecuting maintenance. Printing cannot be done in the maintenance mode.After completion of maintenance, pressing the Maintenance button allows you toexit the maintenance mode.Insert a memory card. Insert a memory card after checking its orientation.See “Using a Memory Card” on page 8.If a memory card has already been inserted, remove it and then insert it again.Next, check that the indicator lamp stays on.The printer’s card slot has been write-enabled. ......The memory card utility started on the computer has write-enabled the card slot.When the card slot is write-enabled, the printer cannot print images.When you have finished writing data to the card, cancel the write-enable mode.For the cancellation procedure, See “Setting up the Card Slot as the MemoryCard Drive of the Computer” on page 23.There is a problem with the memorycard or it is not. ......• The memory card is inserted incorrectly.Insert the memory card after checking its orientation. See “Using a MemoryCard” on page 8.If a memory card has already been inserted, remove it and then insert it again.Next, check that the indicator lamp stays on.• The memory card cannot be read.Image data edited/processed on the computer must also be printed from thecomputer.Insufficient disk space. ...... The hard disk of the computer does not have a sufficient free space.Delete unnecessary files on the hard disk to create a sufficient free space, thenstart the Photo Viewer again.Insufficient memory. ...... The computer does not have sufficient free memory.Close some applications or increase virtual memory, then start the Photo Vieweragain.A digital camera is connected to theprinter. ......Printing from a computer or the operation panel cannot be done when a digitalcamera or digital video camcorder is connected to the printer.After completion of operation from the digital camera, disconnect the connectioncable.Failed to communicate with theprinter. ......The computer cannot communicate with the printer.Check whether the cable is connected securely between the printer andcomputer.Turn the printer off and on again, then start the Photo Viewer again.Failed to print. ...... An unexpected error occurred during printing.Turn the printer off and on again.An internal error (code = nnnn)occurred. ......(n: Alphanumeric character)An internal error occurred.Turn the printer off and on again, then start the Photo Viewer again.If the same error persists, reboot the computer and then start the Photo Vieweragain.

/ 44

Related manuals for Canon i470D Series