Canon i470D Printing Manual

Also see for i470D Series: Printing guide Setup instructions Quick start guide Quick start guide Service manual

Contents

Canon i470D Printing Manual Manual pdf 41 page image

Troubleshooting41Cannot Print Properly from the Digital CameraThe following messages may be displayed on the digital cameras or digital videocamcorders when images are printed directly from them. Take the appropriate action tocorrect the error.Notes z Images can be printed directly from Canon “Bubble Jet Direct” compatibledigital cameras and digital video camcorders connected to this printer.z If the connected digital camera or digital video camcorder does not support“Bubble Jet Direct” the PowerPowerPowerPower lamp on the printer will flash eleven times. Ifthis happens, disconnect the connection cable and press the ResumeResumeResumeResumebutton.z If the operation time or data transmission time is too long when the digitalcamera or digital video camcorder is connected to this printer, acommunication time error may occur and no more images can be printed. Ifthis error occurs, press the ResumeResumeResumeResume button.The digital camera will automatically turn on. If not, turn it on.z A low ink warning is not displayed on the digital camera.z After replacing an ink tank, cancel the connection with the digital cameraand reset the ink counter. See “Reset the ink counter.” on page 36.If the ink counter is not reset, the remaining ink level may not be displayedproperly.z For more details, also refer to the user’s manual for the digital camera ordigital video camcorder.Error message on camera Try ThisPrinter in use Images are printed from the computer.Wait until printing ends.Printer warming up Wait until warm-up ends.No Paper Load the paper in the printer and press the ResumeResumeResumeResume button on the printer.Paper Jam Remove the jammed paper, load new media, and press the ResumeResumeResumeResume button.Printer cover open Close the front cover.No print head No print head is installed. (The PowerPowerPowerPower lamp on the printer flashes six times.)Install a print head according to the Easy Setup Instructions.The print head is defective. (The PowerPowerPowerPower lamp on the printer flashes seven times.)Contact the Customer Care Center.Waste tank full The waste ink tank is nearly full.Press the ResumeResumeResumeResume button on the printer to recover from the error. Contact theCustomer Care Center as soon as possible.Paper lever error Incorrect position of the paper thickness lever.Open the front cover and adjust the paper thickness lever to the left position.Printer error An error requiring servicing has occurred. (The PowerPowerPowerPower lamp on the printer flashesalternately orange and green.)Turn off the printer, unplug the power cord from the power supply, plug thepower cord back in, and then turn on the printer. If the same error occurs, contactthe Customer Care Center.

/ 44

Related manuals for Canon i470D Series