93E RecordingRecording Color Bars/Audio Reference SignalColor BarsYou can generate and record SMPTE (Society of Motion Picture and Television Engineers) color bars.1. Press the BARS/FADE SELECT button to display “COLOR BARS”.• Repeatedly pressing the button will cycle through the options in the following order: COLOR BARS,WHITE FADE, BLACK FADE, no display.• “COLOR BARS” starts flashing.2. Press the BARS/FADE ON/OFF button.“COLOR BARS” stops flashing, and the color bars appear. Press the button again to deactivate the colorbars.Audio Reference SignalYou can record a 1 kHz audio reference signal (-12 dB or -20 dB) along with the color bars.Open the menu and select [AUDIO SETUP]. Select [1kHz TONE], select the audio signaland close the menu.• The selected audio reference signal sounds.• If you select [OFF] the current audio input (microphone, line in, etc.) will be recorded as the audio signal.MENU( 31) AUDIO SETUP 1 kHz TONE•••• OFFBARS/FADE SELECT buttonBARS/FADE ON/OFF button
