Photos1687 Photo OperationsProtecting a Photo from the Index Screen1 Open the [Photos] Index Screen• Refer to Viewing Photos (0 165).2 Move the orange selection frame to the photo to be protected.3 Press SET to open the photo menu.4 Select [Protect] and then press SET.• To remove protection settings from a protected photo, select[Unprotect] instead.• The screen prompts you to confirm the operation.5 Select [OK] and then press SET.• The selected photo is protected and h appears next to the photo’sthumbnail.• Select [Cancel] instead to cancel the operation.• If a custom picture file is embedded in the photo, it is also protected.IMPORTANT• Initializing an SD card will permanently erase all the data it contains,including protected photos and custom picture files.Copying Custom Picture FilesYou can copy to the camcorder a custom picture file embedded in aphoto. Custom picture files can be copied from the photo playbackscreen or [Photos] index screen.Copying a File from the Playback Screen1 Display the photo with the custom picture file to be copied.• Refer to Viewing Photos (0 165).2 Press SET to open the photo menu.3 Select [Copy X File] and then press SET.• The [X Data 1/3] screen appears with the orange selection frameindicating the first file slot in the camcorder.• Alternatively, you can press the CUSTOM PICT. button.• You can push the joystick up/down or turn the SELECT dial todisplay the [X Data 2/3] and [X Data 3/3] screens.4 Select the desired file slot in the camcorder and then press SET.5 Select [OK] and then press SET.• The custom picture file embedded in the selected photo is copied,overwriting the file in that slot.6 When the confirmation message appears, press SET.Operating modes:COPY
