Recording1043 Reviewing a RecordingReviewing a RecordingWhen the camcorder is in mode, you can review the last clip thatwas recorded.1 Open the [Rec Review] submenu to set the review length.[J Other Functions] [Rec Review]2 Select the desired option and then press SET.3 After you finish recording, press the U button.• The last clip that was recorded is played back without audio for theselected duration. [A REVIEW] appears at the top of the screen.• Press the CANCEL button to stop reviewing the clip and change thecamcorder back to record pause mode.• After the clip finishes playing back, the camcorder returns to recordpause mode.OptionsNOTES• When you are using a special recording mode (0 105), you cannotreview a clip.• If the camcorder switched CF cards during a recording, the camcorderwill play back the clip on the CF card most recently recorded on.[J Other Functions][ Rec Review][Entire Clip]Operating modes:[Entire Clip]: Allows you to review the entire clip.[Last 4 sec]: Allows you to review just the last 4 seconds of the clip.COPY