2 21PreparationsPreparing the Power SupplyYou can power the camcorder using a battery pack or directly using the compact power adapter. If you connectthe compact power adapter to the camcorder while a battery pack is attached, the camcorder will draw powerfrom the power outlet.Charge battery packs before use. For approximate charging times and recording/playback times with a fullycharged battery pack, refer to Charging Times (0 170) and Recording and Playback Times (0 170).Using a Battery PackYou can power the camcorder using the supplied BP-925 or optional BP-950G, BP-955, BP-970G or BP-975Battery Pack. The BP-925, BP-955 and BP-975 Battery Packs are compatible with Intelligent System, meaningthat you can check the remaining battery time even while the camcorder is turned off.Charging the Battery PackCharge battery packs using the supplied compact power adapter. Beforecharging, disconnect the DC cable from the compact power adapter andremove the terminal cover of the battery pack.1 If the DC cable is connected to the compact power adapter, disconnectit.• If the DC cable is connected to the compact power adapter, chargingwill not start.2 Connect the power cord to the compact power adapter ().3 Plug the power cord into a power outlet ().4 Attach the battery pack to the compact power adapter ().• Press lightly and slide the battery pack in the direction of the arrow until it clicks.• The CHARGE indicator starts flashing and also indicates the battery pack’s approximate charge. Theindicator will stay on when charging has completed.0-34%: Flashes once per second35-69%: Flashes twice per second70-99%: Flashes 3 times per second5 When charging has completed, remove the battery pack from the compact power adapter.6 Unplug the power cord from the power outlet and disconnect it from the compact power adapter.NOTES• To charge the battery pack, disconnect the DC cable from the compact power adapter.CHARGE indicatorCOPY
