Clip Operations118Copying a Custom Picture File Embedded in a ClipYou can copy the custom picture file embedded in a clip to the camcorder.1 Select the desired clip and then press SET to open the clip menu.2 Select [Copy X File] and then press SET.• The [X Data 1/3] screen appears with the orange selection frame indicating the first custom picture file slotin the camcorder.• You can push the joystick up/down to display the [X Data 2/3] and [X Data 3/3] screens.3 Push the joystick left/right to select the desired file slot and then press SET.4 Select [OK] and then press SET.• The custom picture file already in the selected file slot will be overwritten.• Select [Cancel] instead to cancel the operation.5 When the confirmation message appears, press SET.NOTES• You cannot copy the custom picture file to a file slot with a protected file.• By default, file slots [C7] to [C9] are protected.Displaying an Index Screen of Shot MarksAfter you add shot marks to a clip, you can display an index screen that contains all the frames in a clip witheither shot mark, only the c mark or only the d mark. When you play back a clip from this index screen,playback will start from the frame indicated by the shot mark. You can also perform other operations from thisindex screen, such as adding and deleting shot marks.1 Select the desired clip and then press SET to open the clip menu.2 Select [Shot Mark] and then press SET.• The [Shot Mark] index screen appears, which contains all the frames with shot marks in the clip. Selectinstead [Shot Mark 1] to display an index screen only of the frames with the c mark or [Shot Mark 2] todisplay an index screen only of the frames with the d mark.• The time code under the thumbnail indicates the time code of the frame with the shot mark.• Press the INDEX button to return to the clip index screen.NOTES• After you finish playing back a clip from this index screen, the index screen that was open before the [ShotMark] index screen will appear.Time code of theframe with the shotmarkCOPY
