117Clip OperationsDeleting ClipsYou can delete any clip except those with an e mark. To delete such clips, delete the e mark beforehand.Deleting a Single Clip1 Select the desired clip and then press SET to open the clip menu.2 Select [Delete Clip] and then press SET.• The clip information screen appears and it prompts you to confirm the operation.3 Select [OK] and then press SET.• Select [Cancel] instead to cancel the operation.• While the clip is being deleted, the operation cannot be canceled.4 When the confirmation message appears, press SET.Deleting All Clips1 Open the [Delete All Clips] submenu.[J Other Functions] [Clips] [Delete All Clips]2 Select [OK] and then press SET.• All of the clips (except for clips with an e mark) on the selected CFcard will be deleted.• Select [Cancel] instead to cancel the operation.• While the clips are being deleted, you can press SET to cancel.3 When the confirmation message appears, press SET.IMPORTANT• Observe the following precautions while the CFj or CFl access indicator is illuminated in red. Failure to doso may result in permanent data loss.- Do not disconnect the power source or turn off the camcorder.- Do not open the cover of the selected CF card slot.Deleting the User Memo1 Select the desired clip and then press SET to open the clip menu.2 Select [Delete User Memo] and then press SET.• The [Delete User Memo] screen appears and it prompts you to confirm the operation.3 Select [OK] and then press SET.• The user memo is deleted and the screen changes back to the clip index screen.• Select [Cancel] instead to cancel the operation.[J Other Functions][Clips][Delete All Clips]COPY
