30WirelessIf you click [Wireless] on the left menu, the page below is displayed.This page shows the wireless operating status of this product.Network ConfigurationThis section explains the Network Configuration pages of this product.GeneralIf you click [General] on the left menu, the page below is displayed.In this page, you can configure the host name and network mode.[General Configuration]Name Details(Signal Strength) Displays the signal strength with an antennaimage.Current SSID Displays the current SSID.Current Channel Displays the current channel.Transfer Rate Displays the current transfer rate. This itemappears only in Station mode.Name Details Default ValueHost NameSet the host name.The host name is used for ScannerWireless Connection Utility, WINS,etc. Be sure to use a unique namethat is not used by any otherdevice.WU10-xxxxxx(xxxxxx is thelast 6 digits ofthe Macaddress)NetworkMode Displays the network mode. –