Canon VarioPrint 6000 Series Operation Manual

Also see for varioPRINT 6000 TITAN Series: Manual

Introduction to the countersIntroductionThe [Maintenance] section of the [System] view displays 3 types of counters. 2 of these countersprovide information about the number of sheets that have been printed. The other counterprovides information about the amount of toner that has been used.General counter informationThe following table describes the counters in the [Maintenance] section of the [System] view.Type of counter Description[Billing counters] The [Billing counters] section displays the total number of prints thathave been made since the machine was installed. You cannot reset thebilling counters.[Day counters] The [Day counters] section displays the number of prints that havebeen made since the counter was last reset to 0. You can, for example,reset the day counters at the beginning of a working day or before youstart a new job for a particular customer.[Toner counters] The [Toner counters] section displays the amount of toner that hasbeen used since the machine was installed. You cannot reset the tonercounter.The [Billing counters] and the [Day counters] provide information about the number of 1-sidedand 2-sided prints that have been made on standard-size and large media. The length of themedia determines whether a media is standard size or large. Media with a length of less than 390mm (15.35") are referred to and counted as standard-size media. Media with a length of 390 mm(15.35") or more are referred to and counted as large media.The control panel displays the media icon ( or ) as a small icon for standard-size media. Forlarge media, the media icon is big. The media icon is used in various places on the control panel,for example in the [Counters] section, in the [Trays] view and in the job information.Introduction to the countersChapter 12 - Maintain the print system 301VarioPrint 6000 line