11 1-21-2Specifications > Product composition > Overview > Receiving:Specifications > Product composition > Overview > Receiving:Product compositionOverviewFeatures:By activating the Remote Fax Kit license option on a unit without an installed fax board, itbecomes possible to send faxes via a separate unit on which a fax board is installed.It is necessary to satisfy the following conditions to use the Remote Fax Kit.No fax board is installed on the unit.The unit is connected on the same network by TCP/IP to an imageRUNNER ADVANCEwith an installed fax board.The Remote Fax Kit is only for sending faxes.It does not handle fax receiving.Sending:Using the PCFAX system, you can send fax image data from the unit on which the RemoteFax Kit is activated to a unit with a fax board.With the Remote Fax Kit activated, configure the settings for connecting to the separateunit with a fax board.On the separate unit with a fax board, set the [Use Remote Fax] setting to [On].Receiving:Use the following procedure to receive faxes on the unit without a fax board.Reception is performed with the host machine equipped with the FAX Board using FAXtransfer function, which has been available from existing models.Using the receive/forward setting on the unit with a fax board, specify the unit with theactivated Remote Fax Kit.Receiving faxes is possible even without the Remote Fax Kit. With the iFAX function, whichallows for serverless sending, even a conventional iR unit can receive faxes.•••••