Canon Remote FAX Kit-A1 Service Manual

Contents

Canon Remote FAX Kit-A1 Service Manual Manual pdf 16 page image

22 2-82-8Functions > Basic Function > Reception_Transfer setting(FAX Server) > Send via Server:Functions > Basic Function > Reception_Transfer setting(FAX Server) > Send via Server:For each individual send request job, it will hold up to 256 destinations between Simple Modeand Full Mode combined.If send requests exceeding the job storage capacity described above arrive from UniversalSend, the iFAX sending component returns an error.The origin of the iFAX notified of the error tries to resend the fax, and the send request jobremains in the iFAX sending queue.New sending actions cannot be performed if a new sending job is added and the iFAXsending queue becomes full.Mode SelectionIf a fax is sent in Full Mode to a machine that does not support Full Mode, deliveryconfirmation cannot be performed.As a result, even though the sending itself is complete, the job is not finished.Jobs like this appear on the job status screen as [Waiting for Send Confirmation] until the timeset for [Full mode sending timeout] under [Setting/Registration] > [Function Settings] > [E-Mail/I-Fax Settings] has elapsed.Once the sending timeout in Full Mode has elapsed, the job is moved to the job history. Thesend result is shown as "--."iFAX AddressIf the destination IP address is not registered on the DNS server when sending directlywithout the server, enter "user@[destination IP address]". Enter any text string for "user".Reception_Transfer setting(FAX Server)Below a reception / transfer setting example without E-Mail Server.I-FAXSetting/Registration > Set Destination > Register Destinations > iFAXName:Input it voluntarily.Mode:When You want to confirm the transfer situation by FAX Server, You make it Full.As for the Full case, setting of the SMTP is necessary for iR according to a thing of adestination.I-Fax Address:Because it is an address of iFAX, Input [xxx@receiving side of IP address].(Ex:1234@172.16.1.10)Send via Server:Turn it off without going by way of a Mail server when You transmit iFAX between iR to iR.ImportantWhen specifying address using IP address format, it is necessary to put an IP addressin brackets like 123@[172.16.1.100].F-2-10F-2-10