72123456789CoverPreliminary Notes andLegal InformationContents: BasicOperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesPlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuideP ModeErasing All ImagesYou can erase all images at once. Be careful when erasing images,because they cannot be recovered. However, protected images (=70)cannot be erased.Choosing a Selection Method1 Access the setting screen.zz Press the <n> button, and thenchoose [Erase] on the [1] tab (=28).2 Choose a selection method.zz Press the <o><p> buttons to choosea selection method, and then press the<m> button.zz To return to the menu screen, press the<n> button.Choosing Images Individually1 Choose [Select].zz Following step 2 in “Choosing a SelectionMethod” (see above), choose [Select]and press the <m> button.2 Choose an image.zz Once you choose an image followingstep 2 in “Choosing Images Individually”(=70), [ ] is displayed.zz To cancel selection, press the <m>button again. [ ] is no longer displayed.zz Repeat this process to specify otherimages.3 Erase the image.zz Press the <n> button. Aconfirmation message is displayed.zz Press the <q><r> buttons to choose[OK], and then press the <m> button.Specifying All Images at Once1 Choose [Select All Images].zz Following step 2 in “Choosing a SelectionMethod” (=72), choose [Select AllImages] and press the <m> button.2 Erase the images.zz Press the <q><r> buttons to choose[OK], and then press the <m> button.COPY
