104123456789CoverPreliminary Notes andLegal InformationContents: BasicOperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesPlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuideP ModeScreen BrightnessAdjust screen brightness as follows.zz Choose [LCD Brightness], and thenpress the <q><r> buttons to adjust thebrightness.• For maximum brightness, press and hold the <p> button for at least onesecond when the shooting screen is displayed or when in single-image display.(This will override the [LCD Brightness] setting on the [3] tab.) To restorethe original brightness, press and hold the <p> button again for at least onesecond or restart the camera.Hiding the Start-up ScreenIf you prefer, you can deactivate display of the start-up screen normallyshown when you turn the camera on.zz Choose [Start-up Image], and thenchoose [Off].Formatting Memory CardsBefore using a new memory card or a card formatted in another device, youshould format the card with this camera.Formatting erases all data on a memory card. Before formatting, copyimages on the memory card to a computer, or take other steps to back themup.1 Access the [Format] screen.zz Choose [Format], and then press the<m> button.2 Choose [OK].zz Press the <o><p> buttons to choose[Cancel], press the <q><r> buttons tochoose [OK], and then press the <m>button.3 Format the memory card.zz To begin the formatting process, pressthe <o><p> buttons to choose [OK],and then press the <m> button.zz When formatting is finished, [Memorycard formatting complete] is displayed.Press the <m> button.COPY
