63123456789CoverPreliminary Notes andLegal InformationContents: BasicOperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesPlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuideP ModeChanging the Screen Displayed After Shots1 Set [Display Time] to [2 sec.],[4 sec.], [8 sec.], or [Hold](=63).2 Configure the setting.zz Press the <o><p> buttons to choose[Display Info]. Press the <q><r> buttonsto choose the desired option.zz To restore the original setting, repeat thisprocess but choose [Off].Off Displays only the image.Detailed Displays shooting details (=129).• When [Display Time] (=63) is set to [Off] or [Quick], [Display Info] is set to[Off] and cannot be changed.• By pressing the <l> button while an image is displayed after shooting,you can switch the display information. Note that the settings of [Display Info]on the [4] tab cannot be changed. By pressing the <m> button, you can dothe following operations.- Protection (=70)- Erase (=71)• The display will not magnify when using the digital zoom (=35) or TrackingAF (=56).Still ImagesChanging the Image Display Style After ShotsYou can change how long images are displayed and what information isdisplayed immediately after shooting.Changing the Image Display Period After Shots1 Access the [Review image aftershooting] screen.zz Press the <n> button, choose[Review image after shooting] on the[4] tab, and then press the <m> button(=28).2 Configure the setting.zz Press the <o><p> buttons to choose[Display Time]. Press the <q><r>buttons to choose the desired option.zz To restore the original setting, repeat thisprocess but choose [Quick].Quick Displays images only until you can shoot again.2 sec., 4 sec.,8 sec.Displays images for the specified time. Even while the shot is displayed,you can take another shot by pressing the shutter button halfway again.Hold Displays images until you press the shutter button halfway.Off No image display after shots.COPY
