20123456789CoverPreliminary Notes andLegal InformationContents: BasicOperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesPlayback ModeWi-Fi FunctionsSetting MenuAccessoriesAppendixIndexBasic GuideP Mode4 Install the files.zz Turn the camera on, and follow theon-screen instructions to complete theinstallation process.XX The software will connect to the Internetto update to the latest version anddownload new functions. Installation maytake some time, depending on computerperformance and the Internet connection.zz Click [Finish] or [Restart] on the screenafter installation and remove theCD-ROM when the desktop is displayed.zz Turn the camera off and disconnect thecable.• When not connected to the Internet, there are the following limitations.- The screen in step 3 will not be displayed.- Some functions may not be installed.• The first time you connect the camera to the computer, drivers will be installed,so it may take a few minutes until camera images are accessible.• If you have several cameras that were bundled with ImageBrowser EX on theincluded CD-ROMs, be sure to use each camera with their included CD-ROMand follow the on-screen installation instructions for each. Doing so will ensurethat each camera will receive the correct updates and new functions via theauto update function.2 Begin the installation.zz Click [Easy Installation] and follow theon-screen instructions to complete theinstallation process.3 When a message is displayedprompting you to connectthe camera, connect it to acomputer.zz With the camera turned off, open thecover ( ). With the smaller plug of theincluded interface cable (=2) in theorientation shown, insert the plug fullyinto the camera terminal ( ).zz Insert the larger plug of the interfacecable in the computer’s USB port. Fordetails about USB connections on thecomputer, refer to the computer usermanual.COPY
