1212345678CoverPreliminary Notesand Legal InformationContents: BasicOperationsAdvanced GuideCamera BasicsSmart AutoModeOther ShootingModesPlayback ModeSetting MenuAccessoriesAppendixIndexBasic GuideP ModeInitial PreparationsPrepare for shooting as follows.Attaching the Strapzz Thread the end of the strap through thestrap hole ( ), and then pull the otherend of the strap through the loop on thethreaded end ( ).Holding the Camerazz Place the strap around your wrist.zz When shooting, keep your arms close toyour body and hold the camera securelyto prevent it from moving. Do not restyour fingers on the flash.A2600Charging the BatteryBefore use, charge the battery with the included charger. Be sure to chargethe battery initially, because the camera is not sold with the battery charged.1 Insert the battery.zz After aligning the marks on the batteryand charger, insert the battery by pushingit in ( ) and down ( ).2 Charge the battery.zz CB-2LF: Flip out the plug ( ) and plugthe charger into a power outlet ( ).zz CB-2LFE: Plug the power cord into thecharger, then plug the other end into apower outlet.XX The charging lamp turns orange andcharging begins.XX When charging is finished, the lamp turnsgreen.3 Remove the battery.zz After unplugging the battery charger,remove the battery by pushing it in ( )and up ( ).CB-2LFCB-2LFEDownloaded From camera-usermanual.com Canon Manuals
